Komo VR 510 Mach Xtreme CNC Router, S/N 1044-09-09-15-US (2009), 48" x 155" Travel, Spindle Speed: 24,000-RPM, Spindle HP: 16, Spindle Taper: HSK6...
The featured lots page shows the best lots from the BidSpotter.com website. These featured lots have been chosen by our auctioneers and showcase their premier items.
This is just a small selection of the huge volume of lots on BidSpotter.com. You can search across the entire site for the items you are looking for. If you can't find what you are looking for you can set up alerts to notify you when that item is added to the site.
Komo VR 510 Mach Xtreme CNC Router, S/N 1044-09-09-15-US (2009), 48" x 155" Travel, Spindle Speed: 24,000-RPM, Spindle HP: 16, Spindle Taper: HSK6...
Komo VR 510 MX CNC Router, S/N 1043-09-09-15-US (2009), 48" x 155" Travels, Spindle Speed: 24,000-RPM, Spindle HP: 16, Spindle Taper: HSK63F, 48" ...
Komo VR1008TT Mach III CNC Router, S/N 45485-07-01-03 (2003), 162" x 158" x 15" Axis Travel, Spindle Speed: 24,000-RPM, Spindle HP: 16, Spindle Ta...
Komo Mach III VR-1005TT 3-Spindle CNC Router, Fanuc CNC Control, (2) 60" X 60" Tables, (3) 12-Position Automatic Tool Changers, 24,000 Max. RPM, 1...
Doosan Mynx 5400/50 CNC Vertical Machining Center, Doosan-Fanuc i-Series CNC Control, Travels: X-40.1", Y-21.2", Z-20.8", Table Size: 47.2" X 21.2...
Fanuc Robot M-2000iA/1200 with Fanuc System R-30iA Controller- (LOADING FEE $200)
2019 Haas UMC 750 Vertical Machining Center, With Trinity Robot F 242379 AX5 Fanuc Robot Pallet System, 32 Stations, 7.5" Pallets, 26 Pallets Tota...
2017 Haas UMC 750 Vertical Machining Center, Fanuc Robot, 42 Station Pallet System, AX5 Trinity, 10 Pallets 14 1/2", Remote Jog, 40 Station Side M...
2020 Hwacheon VT-650R MC, 1500 RPM, 24" Chuck, 12 Station Turret, Live Milling, 35" Max Swing, Max. Turn Height 29.5", Fanuc Oi-TF Control, Renish...
2022 Hwacheon VT-650L, 1500 RPM, 24" Chuck, 12 Station Turret, 35" Max Swing, Max. Turn Height 29.5", Tool Prestter, Fanuc i Series Control, Chip ...
Mitsubishi M-H4B/16 Horizontal Machining Center (2000) Pallet Size (Cap.) 15.75″ x 15.75” / (880 lbs.) Pallet Indexing (B-Axis) 0.001° Spindle Nos...
Kitamura MyCenter HX400iF X Axis Travel: 28.93″ Y Axis Travel: 24.01″ Z Axis Travel: 24.01″ B Axis: 0.001° ( Full 4th ) Table: Length: 15.7″ Width...
Star Micronics Model SR-20J Type C CNC Swiss-Type Automatic Lathe, S/N: 3487 (170) (2014); with Fanuc Series 31i-Model B CNC Controller, FMB Turbo...
Star Micronics Model SR-32J Type 670 CNC Swiss-Type Automatic Lathe, S/N: 0789 (153) (2008); with Fanuc Series 18i-TB CNC Controller, Machine Boss...
Cincinnati Arrow 500 CNC Vertical Milling Machine Loading Fee: TBD Click HERE for Video! *Note - Tool carousel is missing (2) spots. Runs fine, ...
Location: Muskegon, MI (BTM Consignment Warehouse) Loading Fee: $250 2011 Fanuc R2000iB 210F w/R30iA Controller Hours:
YCM NMV106A Vertical Machining Center (2014) X Axis Travel: (40.16″)Y Axis Travel: (23.62″)Z Axis Travel: (23.62″)Table Work Surface Area: 44.0...
CNC BED TYPE MILLING BRAND NOVAR FANUC CONTROL CAN BE INSPECT UNDER POWER ON APPOINTMENT ** FRAISEUSE À BANC CNC MARQUE NOVAR CONTRÔLEUR FANUC INS...
Doosan Lynx 220A CNC Turning Center with Collet Chuck, Approx. 20.1" Swing x 20.7" Max. Turning Length, Spindle Speeds to 6,000 RPM, Approx. 1.8" ...
Doosan Lynx 220A CNC Turning Center with Collet Chuck, Approx. 20.1" Swing x 20.7" Max. Turning Length, Spindle Speeds to 6,000 RPM, Approx. 1.8" ...
Doosan Lynx 220C CNC Chucking Lathe with Collet Chuck, Approx. 20.1" Swing x 20.7" Max. Turning Length, Spindle Speeds to 4,000 RPM, Approx. 2.05"...
Doosan-Daewoo Lynx 220A CNC Chucking Lathe with 6'' 3-Jaw Chuck, Approx. 20.1'' Swing x 12'' Max. Turning Length, Spindle Speeds to 6,000 RPM, App...
DOOSAN / DN SOLUTIONS MODEL LYNX 2100LSYB CNC TURNING CENTER; S/N ML0406-000950 (NEW 8/2022), 24-POSITION TURRET WITH 1/2 INDEXING, WITH (4) LIVE ...
DOOSAN / DN SOLUTIONS MODEL SVM4100 CNC VERTICAL MACHINING CENTER; S/N MV0157-000036 (NEW 8/2021), 30-POSITION ATC, CAT 40, 12,000 RPM SPINDLE, FA...
DOOSAN / DN SOLUTIONS MODEL NHP5000 CNC HORIZONTAL MACHINING CENTER; S/N MH0029-000368 (NEW 10/2020), 257 CUTTING HOURS, CAT 40, FULL B-AXIS, 15,0...
Fanuc Mdoel R-2000iC/210F Robot, with Fanuc System R-30iB Plus Control, s/n E18730994, Each Pendant, Listed in Good Condition
NAKAMURA-TOME (2009) SC-450 CNC TURNING CENTER WITH FANUC SERIES 21I-TB CNC CONTROL, 31.88" SWING OVER BED, 40.74" DISTANCE BETWEEN CENTERS, 18.30...
NAKAMURA-TOME (2018) WT-300 MMYS BIG BORE 7-AXIS OPPOSED SPINDLE AND TWIN TURRET CNC MULTI-TASKING CENTER WITH FANUC SERIES 18I-TB CNC CONTROL, 7....
2007 Mag Fadal VMC 2216FX CNC Vertical Machining Center, SN 0120007111271 Number of Axes 3 Rapid Traverse (X,Y,Z) 1000 Spindle Motor Cont. 15 Spin...
Femco HL-555 CNC Lathe (2005) Max Turning Diameter: 25.4″ Max Turning Length: 42.12″ Max Bar Capacity: 4.65″ Swing Over Bed: 28.4″ Distance Betw...
Giddings & Lewis VTC-1600 CNC Vertical Boring Mill, Fanuc 160i-TB CNC Control, 63” Table Capacity, 78” Swing, 85” Under Ram Face, 68” Ram Stroke, ...
Giddings & Lewis VTC-1600 CNC Vertical Boring Mill, Fanuc 160i-TB CNC Control, 63” Table Capacity, 78” Swing, 85” Under Ram Face, 68” Ram Stroke, ...
63” Schiess CNC Vertical Turning Center with Live Milling, Fanuc 15-M CNC Control, 63” 4-Jaw Chuck, 78” Swing, 76” Turning Height, 1-315 RPM, C-Ax...
Asquith Butler CNC 5-Face Gantry Type Milling Machine, Fanuc 16i-M CNC Control, X-395”, Y-137” , Z-47”, 144” Between Columns, Spindle Speeds 10-30...
Ikegai ANC-56 Center Drive CNC Lathe, Fanuc 18-T CNC Control, 11" Through Hole, Right Side: 56" Swing over Bed, 36" Over Carriage, 240" Between Ce...
Kitamura HX400IF Horizontal Machining Center W/ Fanuc Series 16-MB; 20,000 Spindle Speed; 150ATC; (2) 16" Pallets; Cutting Time: 39917hrs (Asset# ...
2018 Kitamura HX400IG Horizontal Machining Center W/ Fanuc Series 16-MB; 13,000 Spindle Speed; 150ATC; (2) 16" Pallets; Spindle Time: 44806760hrs ...
Kitamura XL500ID Horizontal Machining Center W/ Fanuc Series 16i-MB Controller, 12,000 Spindle Speed; 140ATC; Cutting Time: 38,849hrs; W/ 5th-Axis...
2007 Kitamura XL500ID Horizontal Machining Center W/ Fanuc Series 16i-MB Controller, 12,000 Spindle Speed; 140ATC; W/ 5th-Axis ; (1) 20" Pallet; C...
2007 Kitamura MyTrunion-5 5-AxisMachining Center W/ Fanuc Series 16i-MB; 20,000 Spindle Speed; 100ATC; Cutting Time: 35,720hrs (Asset# 9884151)
Kitamura MyTrunion-5 5-AxisMachining Center W/ Fanuc Series 16i-MB; 20,000 Spindle Speed; 100ATC; Cutting Time: 27,011hrs (Asset# 9884214)
2005 Kitamura HX500i Horizontal Machining Center W/ Fanuc Series 16i-MB; 20,000 Spindle Speed; 140ATC; W/ 5th-Axis ; (1) 20" Pallet; Cutting Time:...
2020 Doosan Puma 5100LB Horizontal CNC Lathe 12-Tool Turret; W/ 25-1/2"O.D 3-Jaw Chuck On Machine; W/ 24" Samchully 3-Jaw Chuck On Pallet; W/ Tool...
SIP SIP-600 Jig Boring Machine W/ Fanuc Series oi-MF Controller; Run Time: 309hrs; Cutting Time: 349hrs; Equipped W/ Security Guard Fence (Asset# ...
SIP SIP-640 Jig Boring Machine W/ Fanuc Series 16i-M Controller; Cutting Time: 15,304hrs
2008 Yasda YBM7T 5-Axis Horizontal Maching Center W/ Fanuc Series 31i-Model A5 Controller; W/ (5) 25" Pallets, (2) 5th-Axis; 240ATC; Cut Time: 37,...
Yasda YBM-700N 5-Axis Horizontal Maching Center W/ Fanuc Series 150i-M Controller; (6) 25" Pallets, (1) 5th-Axis; 240ATC; W/ (2) Rolling Material ...